Compact and lightweight, this Center CB end feed 90° elbow with 15mm connections is designed for ease of handling and straightforward installation, even in awkward spaces. A smooth design helps to minimise flow restrictions while also ensuring the fitting looks neat when installed on exposed pipelines. Center CB's end feed general range is suitable for use with soft or hard solder, or brazing alloy. A solder joint is created through the principle of capillary action. When fitting and tube are heated to the correct temperature, the solder becomes molten, allowing it to be drawn into the gap between the two for a tough, reliable joint.

Center CB End Feed CB-EFEL015 end feed elbow 15mm

Compact and lightweight, this Center CB end feed reducer with 22mm male x 15mm female connections is designed for ease of handling and straightforward installation, even in awkward spaces. A smooth design helps to minimise flow restrictions while also ensuring the fitting looks neat when installed on exposed pipelines. Center CB's end feed general range is suitable for use with soft or hard solder, or brazing alloy. A solder joint is created through the principle of capillary action. When fitting and tube are heated to the correct temperature, the solder becomes molten, allowing it to be drawn into the gap between the two for a tough, reliable joint.

Center CB End Feed CB-EFRED02215 end feed reducer 22 x 15mm

This Geberit Mapress 28 x 28mm 90° bend is made of copper with press-fit connections. It is suitable for use in cold/hot potable water, heating water, cooling water with or without anti-freeze agent, remote network heating water less than or equal to120°C, service water, compressed air (oil purity class 0 - 3), negative pressure, inert gases such as nitrogen and in technical building systems, industry and shipbuilding.

Geberit Mapress 90deg elbow 28mm Copper

Made of copper, this VSH Xpress S24/7130 15 x 15 x 15mm 90° tee with press-fit end connections for jointing copper tube incorporates Leak Before Press technology, developed to provide instant identification of joints that are correctly assembled but mistakenly unpressed, saving on time, money and expensive call-outs. Offering quick and effective copper tube jointing to BS EN 1057 R250 and R290 standards, XPress fittings are suitable for use on hot and cold water services, vented and unvented closed circuit heating, chilled water and oil-free compressed air within permissible pressure and temperature limits.

Pegler VSH XPress equal tee 15mm Copper

This Geberit Mapress 28 x 28mm coupler is made of copper with press-fit connections. It is suitable for use in cold/hot potable water, heating water, cooling water with or without anti-freeze agent, remote network heating water less than or equal to120°C, service water, compressed air (oil purity class 0 - 3), negative pressure, inert gases such as nitrogen and in technical building systems, industry and shipbuilding.

Geberit Mapress straight coupling 28mm Copper

Compact and lightweight, this Center CB internal solder ring (ISR) 90° elbow with 22mm connections is designed for ease of handling and straightforward installation, even in awkward spaces. A smooth design helps to minimise flow restrictions while also ensuring it looks neat when installed on exposed pipelines. Precision-made, the ISR incorporates best-quality solder in each capillary socket, ready to create a reliable joint with no need to end feed. A solder joint is created through the principle of capillary action. When fitting and tube are heated to the correct temperature, the solder becomes molten, allowing it to be drawn into the gap between the two for a tough, reliable joint.

Center CB 635849 90deg integral solder ring elbow 22mm

Made of copper, this VSH Xpress S1/7270 15 x 15mm coupler incorporates press-fit end connections for jointing copper tube and Leak Before Press technology, developed to provide instant identification of joints that are correctly assembled but mistakenly unpressed, saving on time, money and expensive call-outs. Offering quick and effective copper tube jointing to BS EN 1057 R250 and R290 standards, XPress fittings are suitable for use on hot and cold water services, vented and unvented closed circuit heating, chilled water and oil-free compressed air within permissible pressure and temperature limits.

Pegler VSH XPress straight coupling 15mm Copper

This Geberit Mapress 22 x 22mm 45° bend is made of copper with press-fit connections. It is suitable for use in cold/hot potable water, heating water, cooling water with or without anti-freeze agent, remote network heating water less than or equal to120°C, service water, compressed air (oil purity class 0 - 3), negative pressure, inert gases such as nitrogen and in technical building systems, industry and shipbuilding.

Geberit Mapress 45deg elbow 22mm Copper

This Geberit Mapress 28 x 28 x 28mm 90° tee is made of copper with press-fit connections. It is suitable for use in cold/hot potable water, heating water, cooling water with or without anti-freeze agent, remote network heating water less than or equal to120°C, service water, compressed air (oil purity class 0 - 3), negative pressure, inert gases such as nitrogen and in technical building systems, industry and shipbuilding.

Geberit Mapress equal tee 28mm Copper

Compact and lightweight, this Center CB internal solder ring (ISR) 90° elbow with 15mm connections is designed for ease of handling and straightforward installation, even in awkward spaces. A smooth design helps to minimise flow restrictions while also ensuring it looks neat when installed on exposed pipelines. Precision-made, the ISR incorporates best-quality solder in each capillary socket, ready to create a reliable joint with no need to end feed. A solder joint is created through the principle of capillary action. When fitting and tube are heated to the correct temperature, the solder becomes molten, allowing it to be drawn into the gap between the two for a tough, reliable joint.

Center CB 635848 90deg integral solder ring elbow 15mm

Designed for ease of handling and installation, this Center CB internal solder ring (ISR) 15mm straight coupling is lightweight and compact, making it ideal for more challenging installations. The fitting's smooth design minimises flow restrictions and looks neat and tidy on exposed pipelines. Precision-made, an ISR has high quality solder inside each capillary socket, meaning that it's ready to create a reliable joint with no need to end feed.  A solder joint is created through the principle of capillary action. When fitting and tube are heated to the correct temperature, the solder becomes molten, allowing it to be drawn into the gap between the two for a tough, reliable joint.

Center CB 635809 integral solder ring straight coupling 15mm

Designed for ease of handling and installation, this Center CB internal solder ring (ISR) 22mm straight coupling is lightweight and compact, making it ideal for more challenging installations. The fitting's smooth design minimises flow restrictions and looks neat and tidy on exposed pipelines. Precision-made, an ISR has high quality solder inside each capillary socket, meaning that it's ready to create a reliable joint with no need to end feed.  A solder joint is created through the principle of capillary action. When fitting and tube are heated to the correct temperature, the solder becomes molten, allowing it to be drawn into the gap between the two for a tough, reliable joint.

Center CB 635810 integral solder ring straight coupling 22mm

Looking for our essential range metal pipe fittings? Order from Wolseley today - free delivery or click and collect available nationwide.

Our Essential Range Metal Pipe Fittings